This is the full page layout for any cabinet family tab such as 20_FS_2DR or 21_WH_2DR. Use the same structure for each family so the workbook stays consistent.
| Field | Example |
|---|---|
| Cabinet Code | 20_FS_2DR |
| Width | 600 |
| Height | 810 |
| Depth | 450 |
| Mount Type | Feet |
| Overlay / Inset | Overlay |
| Setting | Override value | Reason |
|---|---|---|
| Front rail height | 145 | Specific to this family |
| Divider rule | No divider | 2-door unit construction choice |
This should use the same structure as 11_Template_Panel_Logic, but populated for the specific family.
| Part | Qty | Length | Width | Material | Formula notes |
|---|---|---|---|---|---|
| Side | 2 | 710 | 434 | Melamine | Height less feet, depth less front deduction |
| Bottom | 1 | 430 | 568 | Melamine | Between sides |
| Door | 2 | 727 | 292 | MDF | Overlay front sizing rules |
| Item | Qty | Rule | Total |
|---|---|---|---|
| Feet | 4 | Standard floor-standing assumption | 80.00 |
| Hinges | 4 | 2 per door | 20.00 |
| Cost group | Total |
|---|---|
| Board cost | 198.30 |
| Hardware cost | 107.40 |
| Total cabinet cost | 431.70 |