Core calculation sheet for all panel-based components. This is where the cutting logic, materials, edging, grain direction, and panel costing become visible.
| Part Group | Part Name | Qty | Length (mm) | Width (mm) | Thickness | Material | Finish | Edge 1 | Edge 2 | Edge 3 | Edge 4 | Grain | Formula - Length | Formula - Width | Formula - Qty | Cost per m² / unit | Total Cost | Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Carcass | ||||||||||||||||||
| Carcass | Side | 2 | 710 | 434 | 16 | Melamine | White | Front | Vertical | H - feet height | D - front deduction | 2 | 330 | 102.66 | Main side panels | |||
| Carcass | Bottom | 1 | 430 | 558 | 16 | Melamine | White | Front | Horizontal | D - 16 - 4 | W - (2×T) | 1 | 330 | 78.00 | Sits between sides | |||
| Carcass | Shelf | 1 | 410 | 558 | 16 | Melamine | White | Front | Horizontal | Bottom depth - 20 | Bottom width | 1 | 330 | 75.00 | Reduced depth for clearance | |||
| Fronts | ||||||||||||||||||
| Front | Door | 2 | 727 | 292 | 16 | MDF | Paint / Colour | All | All | All | All | Vertical | Side height - décor rail - gaps | (W - side gaps - centre gap) / 2 | 2 | 586.92 | 126.00 | Confirm final front finish cost |
| Back / Rails | ||||||||||||||||||
| Support | Back Rail | 1 | 100 | 558 | 16 | Melamine | White | None | Standard back rail height | W - (2×T) | 1 | 330 | 18.00 | Top back rail | ||||
| Back | Back Board | 1 | 710 | 590 | 3 | Hardboard | Standard | None | Side height | Cabinet width | 1 | 73.80 | 31.00 | Check if full back or inset back | ||||